Limestone Powder Making Machine/Minning Equipment/Roller Mill/Stone Processing Machine/Stone Crushing Machine

Basic Info

Model NO.	86-318
Type	Roller Mill
Motor Type	AC Motor
Motor Power	135kw
Rotationl Speed	1500-3000rpm Adjustable
Application	Mine
Materials	Calcite, Limestone, Dolomite, Barite, Talc, Clay
Condition	New
Color	Customized
Wearing Spares	Available
Transport Package	Glued Wooden Boxes and Loose Packing
Specification	customized
Trademark	HT
Origin	China
HS Code	84742010
Production Capacity	100 Sets/Month

Packaging & Delivery

Package size per unit product 9000.00cm * 5000.00cm * 15000.00cm Gross weight per unit product 15000.000kg

Product Description

Super Fine Calcium Carbonate Grinding Mill
I. Brief introduction.
Super fine calcium carbonate grinding mill is a new-type grinding mill developed by our company for decades, combining rolling, impacting and grinding to one. It is an ideal ultrafine ground calcium carbonate grinding mill for deeply processing non-metallic minerals which hardness less than Moh's 5, such as calcium carbonate, barite, talc, gypsum, calcite, limestone, calcium oxide, bentonite, dolomite etc. The finished particle size can reach 325-3000 mesh(3.5-50 microns).
II.Grinding mill working principle.
When operating, the raw material is fed continuously from the input system into pulverizing chamber, the material will be fully pulverized after impacting, pulverizing, grinding and concussion by the grinding wheel; then the pulverized material is conveyed to the classifying chamber to be classified according to their particle size. The qualified particle will go into cyclone separator through grading wheel, and then go out to be product. A little unseparated powder will be collected by high-effective dust collector then putout to be qualified product. During this period, the whole system is working under negative pressure, the air which is cleaned by dust remover will go out through high-pressure air-introduced machine, and no dust will out to the air.
III.Grinding mill advantages.
Environment friendly without pollution:Adopting the complete set of negative-pressure production and high efficient off-line deduster ,its dust collection efficiency reaches up to 99.9%,which guarantees no dust pollution during operation. Moreover, the main unit and the air blower are respectively equipped with the noise-reduction housing and the muffler so as to decrease the noise, which is completely in conformity with the national environmental protection standards.
The power distribution cabinet installment is automatic control: it can avoid human factor to make mistakes, guaranteeing the quality of product is stable, lengthening the service life of equipment, reducing the operators and the cost. Installation of the complete set of equipment is convenient:No need large-scale construction, it covers only small area. It can be put into production as soon as we finishing installing. It can run smoothly and reliably. It is used for grinding non-metal mines with Mohs' hardness scale less than 5, moisture less than 3% and Max. input size 10 mm.Both product size and fineness are guaranteed: the new YFM grinding mill is able to reach a product fineness of 325 mesh-3000 mesh one time, while the traditional Raymond mill can only reach a fineness of 400 mesh for the most. It can be used for all kinds of grinding from coarse crushing to ultra fine grinding, with the largest fineness of up to D97≤ 3 micron, which drives the revolution in the field of ultra-fine grinding. It has high-effective cyclone system and dust remover. The dust remover has excellent dust removing effect, it won't be blocked. The product comes out from the cyclone system and the dust remover can do both separately packing or gather together then do packing.The main body and its electrical machinery are installed separately to make sure the grinding machine can work more stable.The grinding motor is controlled by a soft starter. By this can save powder and give a better protection.The fineness of the product can be transformed quickly if you want to produce the different products in different particle size; the stability of the product is good.Low investment cost and high output efficiency. Compared to ball mill, air-flow mill and stirred mill, YFM grinding mill has the advantages of lower investment and shorter processing circle, and its finish fineness/efficiency ratio is more than twice that of the machines mentioned above for the same fineness.Low maintenance cost and simple operation. Compared to Raymond mill, YFM grinding mill has no bearings but the high-hardness wear-resistant material developed by our company within the grinding chamber, which not only avoids chronic consumption of oil and burnt bearing but also guarantees the continuous and reliable operation of the machine.This equipment is sophisticated and stable. Continuous improvements have been made within the decade since the establishment of our company;the complete machines from its materials, its processing to its assembly , is completely self-produced, which forms as the benchmark for the crushing industry and becomes the one being simulated at domestic market and oversea market.

IV.Specification.

		YFM-86	YFM-198	YFM-318
Feeding materials size(mm)		≤10	≤10	≤10
Material moisture %		≤ 3	≤ 3	≤ 3
Finished fineness	mesh	325--3000	200--2500	200--2500
Finished fineness	micron	3.5--45	5--50	5--50
Output(kg)		500--4000	800--7000	1700--12000
Motor power Consumption(kw)	Main motor	75	132	185--200
	Classifier	18.5--22	30	45--75
	Air blower	45--55	55--75	132
	Feeder	1.5--3	1.5--3	3
	Discharge screw	3	3	3--6
Air compressor(m3)		1.5--2	2	2
Dimension(mm)		1200031005900	1400038006200	1580058007300
Weight(T)		17	23

Note: The above parameters are tested by calcite for reference only,there might be slight differences regarding to different materials.

V.Power consumption

	YFM-86		YFM-198		YFM-318
Mesh No.	Output kgs/H	Power consumption Kwh/T	Output kgs/H	Power consumption Kwh/T	Output kgs/H	Power consumption Kwh/T
325			6000-6500	30	10500-12000	30
400			5600-6000	35	9500-10500	35
600	2000-2200	50	3800-4200	45	6500-7200	45
800	1600-2000	60	3600-4000	55	6000-6800	55
1250	1200-1600	80	2200-2300	75	3700-3900	75
1500	800-1000	105	1500-1800	100	2500-3100	100
2500	500-700	150	1000-1200	160	1700-2000	160
3000	400-600	170	700-900	180

Note: The above parameters are tested by calcite for reference only,there might be slight differences regarding to different materials.

VI.Wearing spares available, alloy material with HRC 37-40 and high chrome steel material with HRC 60-62.

Limestone Powder Making Machine/Minning Equipment/Roller Mill/Stone Processing Machine/Stone Crushing Machine